Our Kingkus Wooden Timber Acoustic System utilizes aesthetically pleasing wood plank panels to create exquisite wall and ceiling treatments. Kingkus works on a concept of creating high performance acoustical products with an exceptional visual appearance.
Acoustical Wooden Acoustic Panel come in a variety of configurations to meet all acoustical requirements. Wooden acoustic panel balances sound reflection and absorption through perforations. Using perforated rigid materials in conjunction with absorptive backings, allow for aesthetically pleasing wall and ceiling finishes while providing excellent acoustic performance.
Kingus Wooden Factory select wood veneers sliced from hand-picked logs and bonded to fire retardant medium density fiberboard. Manufacturing then applies two coats of UV polyacrylate lacquer. This insures consistent quality for each panel on every project.
The reverse side of each panel receives a layer Felt acoustic textile.
Extensive supply for middlemen and projects
|Model||Kusuper Composite wooden panel|
|Specification||Groove 3mm, Center to Center 5mm|
|Surface||Melamine / Wooden Veneer with Varnish/ Painting / HPL|
|Co Material||E0 MDF/B1 MDF/Magnesium composited /NF Golden|
|Back||Soundtex acoustic felt|
|Installation||Aluminum keel and clips, wood frame, gun nail|
|Test||Eco protction, sound absorption, flame retardant|
TECHNICAL INFORMATION FOR KINGKUS WOODEN ACOUSTIC CEILING PANEL:
There are different sort of large dimension panels to be used on walls and not practicable continuous roofs, and standarized roof plates in versions of visible profiling, semi-hidden, hidden and practicable hidden.
Panel plates are often used on mesures 2440*133mm,2440*197mm(2400x1200, 2400x600mm for Perforated wooden panel). with 15mm,16mm,18mm of thickness.
it is more usual to use 15mm thick plates on standardized measures 1200*133mm,1200*197mm(1200x600 and 600x600 for Perforated wooden panel), though other combinations are also possible.
The different plates are available with different perimetral , depending on the type of desired assembly.
Materials and finishes:
The support material is always MDF E0 and fiberboard wood panels in standard or fireproof versions. Surface finishes can be raw, melamine,Veneer, varnished or lacquered. Other options on request.
The plates may incorporate to the back and as an option, an acoustic veil to improve the sound absorbing qualities of the panel.
Cleaning and maintenance:
After installation, the panels should be treated as any fine piece of furniture would be treated. A final cleaning with a soft cloth and any good furniture polish will enhance and preserve the luster of the finish. Panels may be vacuumed with a non-marring, natural bristle head. Avoid using a short or hard bristle cleaning head as damage may occur. After removing the dust, you should restore the woods beauty by wiping the panels with a quality furniture polish such as lemon oil.
Do not spray the polish directly on the panel. Instead, apply the polish to a soft dust-free cloth and wipe the panels lightly. At all costs, avoid using water or a damp cloth as this may affect the stability of the veneer surface. The intervals of cleaning will depend on the conditions of your building. Cleaning is recommended at least once a year but may be dependent upon your building conditions. Periodic maintenance will preserve the look and performance of Kingkus wooden acoustic panel for many years to come.
Any design can be customized